FireZero WIN

100% Cotton

Introduction to WIN

Only premium cotton fibre is used in the FireZer0 WIN Series. The cotton fibre is carefully blended to maintain consistency for the yarn spinning stage. The WIN fabric series is woven on state of are looms that eliminate major fabric defects.

WIN series offers superior colour fastness and durability by using premium dye stuffs that are safe to use in industrial laundry applications.

The FR treatment is robust and FIreZerO uses European internationally approved FR treatment, low formaldehyde, technology to provide life long FR treatment – the proprietary FR treatment will not wash out.

To control shrinkage of the100% cotton WIN fabric series, special pre shrinkage process is applied at the fabric finishing stage.

The WIN+ also can provide anti-static features, as well as moisture and soil release, if required.

FireZero WIN Fabric Certifications & Safety Information

All FireZero products meet Canadian and US standards.

The certifications are:

NFPA 70E-2015, CSA Z462, CGSB 155.20-2000, OSHA 1910.269, NFPA 2112-2012, CGSB

155.22, CSA Z96, ASTM F1506, EN ISO 11611, EN ISO 11612, EN ISO 14116, ARC THERMAL

  • FireZero Win - Blue

    100% Cotton - Twill Weave

  • FireZero Win - Denim

    100% Cotton - Twill Weave

Win Fabric Features

Certifications

All FireZero products meet and exceed industry standards.

Win Fabric Certifications:
– CAN/CGSB 155.20-2000
– NFPA 70E-2015
– CSA Z462
– CGSB 155.20-2000
– OSHA 1910.269
– NFPA 2112-2012
– CGSB 155.22
– CSA Z96
– ASTM F1506
– EN ISO 11611
– EN ISO 11612
– EN ISO 14116

Premium Cotton

Long staple cotton is used as the standard fibre in FireZero FR. Competitors offer long staple cotton but at a premium price.

Long staple cotton provides much better hand, a allows for superior colour fastness and durability. Industrial wash performance.

Shrinkage Control

Competitive Suppliers of FR fabric have shrinkage issues because they “convert” their FR fabric – some buy un-dyed fabric on the open market, and contract the dyeing, FR treatment and finishing. FireZero is “vertical” – we start with the fibre, make our own yarn, weave the fabric, dye, FR process, finish, and compact for extra shrinkage control, providing the best FR textile to our customers.

FR treatment for life of the garment

FireZero is treated with a lifetime proprietary FR treatment. It will outlast the coverall. The FR treatment is ‘permanent’.

Low Formaldehyde

FireZero has less than 75 parts per million formaldehyde– Competitors have over 1,000 parts per million formaldehyde. The low formaldehyde removes toxins near the skin and also eliminates the “musty” odour when the FR garment gets wet.

Reflective tape

All FireZero coveralls are made with 3M™ Scotchlite™ Retroreflective tape. The 3M™ tape is industrial wash specification for added performance. 3M™ is a leader in reflective tape.

Thread

FireZero only sews with inherent FR thread. We do not use cotton nylon thread as is common with many FR manufacturers.

Sizing

FireZero garment sizing is in the plus side to provide the freedom of movement, and allow for any residual shrinkage.

Sewing

The FireZero standard for sewing is like ‘Armani’. We use only the best sewing equipment and highly skilled operators. The stitches per inch are very tight to create extra seam strength. All seams are strengthened and clean cut.

Labels

All labels are woven cotton and will not melt. Most FR makers use mylar labels that are like plastic like and melt when exposed to an open flame.

Garment Construction

All stress points are bar tacked. Zippers are all brass with FR tape. Action back provides comfort and freedom of movement.

Value

FireZero product line has exceptional value – it is made from the finest components available. It is shipped direct from the manufacturing unit of Sunbridge Textiles International Ltd. eliminating any middle- men in the distribution chain.